Indoor Pond Construction Photos

This pond is also located in my heated garage This pond is 4x8x32" deep, and holds roughly 500 gallons. There is a submersible pump that pumps water to a trickle tower.
Hey, theres room here for another indoor pond I think!
Cut some boards to length
Pre-drill the holes in the corners so the board wont split
Use 3" screws to connect the corners
Form A Ring
A peice of plywood to make the floor smooth
First Ring in place.
Second Ring in place.
Thire Ring in place.
A Peice of plywood to tie all the corners together and re-inforce
Rubber is installed!
Hospital Corners secured with Roofing Nails. Note to self: Screws and washers are better in case you need to remove them later!
Deck Boards to top it off!
Jump sheild and lighting.
Trickle Tower Filter
Happy Koi!